Thursday, 6 November 2014

How To: 30-Minute Basic Leather Tote

 photo ready1_zpsepuhov5r.jpg
Sometimes I find leftovers from previous projects lying around and feel an intense need to put them into use. Last weekend some beaten up leather found a new life as a basic tote that just fits my laptop, wallet, and notebook.

TOOLS:
 photo 0Tools_zps4c736f7c.jpg
Leather (how much will depend on how big of a bag you want to make - add about 15 cm to the width and 7cm to the height you want to finished bag to be)  |  Rope (about 30 cm - thickness should correspond to how thick you want to make the bag handles)  |  Thread and sewing machine (leather needle)  |  Marker  |  Scissors  |  Optional: Black leather dye (if the flipside of your leather is not processed and you'd like the end product to be fully black, like the one I made)

I. Cut out a rectangular piece of leather according to the size you want to ready bag to be. My piece was 40cm x 75cm to start, and the ready bag ended up being 27cm x 32 cm and about 7cm in depth. Make sure you have enough leather to make the handles - you need about 8-10cm in width x the length of handles you're looking for.
I also created the starting rectangle from two pieces of leather, attaching them with a seam - I wanted the end result to have some added structure. You could also just use a single piece with no seam.
 photo 1Cutpiece_zpse32658ad.jpg
II. Fold the rectangle in half, right sides facing, and sew a straight stitch along both edges.
 photo 2sewedges_zps847a06f5.jpg
III. Cut the corners after the stitch open like so:
 photo 3cutslit_zps1063ad79.jpg
IV. This will allow you to fold the corner flat. Here's where you decide the depth of your bag, and mark a straight line as shown in the image below. The further from the corner you mark this line, the more depth (and the less width) your bag will have. Mark a line at the same distance on the other corner, and sew a straight stitch along your marking on both sides.
 photo 4foldcorneropen_zps12d725d4.jpg
 photo 41markedcorners_zps7c379e34.jpg  photo 5sewncorners_zpsb91d7525.jpg
V. Take the remaining leather and place the rope at the edge, wrapping the leather around it. Mark the spot that leaves a few millimetres extra for adding a stitch to the edge, with the rope still fitting nicely inside. Be sure not to make this too tight - you'll need to be able to slide the rope through after sewing the stitch (having gone through multiple DIY fails, that wouldn't be the end of the world though, you could just replace your rope with a slightly less thick variety and continue like nothing happened).
 photo 6measurestrapwidth_zps7adac23f.jpg
VI. Mark the width at a couple of spots along the desired length of your bag handles, and cut out two identical straps of leather. Cut the rope in half to end up with two pieces.
 photo 7markstrapwidthandcut_zpsa350b437.jpg
 photo 8cutstraps_zpsa6d7922d.jpg
VII. Mark the center point of the rope and the leather strap, and two spots 1-2 cm from the ends of the rope. Repeat for second strap.
 photo 81markcenter_zps909e28f3.jpg
VIII. Fold the strap width wise and sew a straight stitch right at the edge, covering the distance that will hold the rope inside.
 photo 9sewnstrap_zps220725e2.jpg
IX. Attach a strong string with a needle (or other weight) to the end of the rope, allow the needle to drop through the tunnel you just made in the strap, and pull the rope through landing it nicely inside the sewn part of the handle.
 photo 10attachthreadtopullthrough_zps46e771b5.jpg
 photo 11ropein_zps095124d1.jpg
X. Continue the stitch a few cm further at both ends of the handle, stopping about 8 cm from the end. Repeat for other handle.
 photo 12continuestitchtoend_zps35a67c3c.jpg
XI. Measure and mark the spots you want the handles to be attached at. The inner edges of my handles were 11cm from the side seam of the bag.
 photo 13measurestrapspot_zps0c658ce7.jpg
XII. Sew the straps in place with a vertical straight stitch down both edges of the strap.
 photo 14strapattached_zps26e0a275.jpg
The final optional step is to take black leather dye and color the insiders of the bag. If you want a more rustic look (or are working with leather that's already been dyed), you can skip this. Enjoy your new bag!
 photo bag_zps3b3244b9.jpg

xo,

Julia

0 comments:

Post a Comment

I would love to hear what you think and learn about your DIY adventures!

 

Contour Affair Copyright © 2011 -- Template created by O Pregador -- Powered by Blogger