Wednesday, 19 November 2014

Wardrobe Staples: Basic Grey Faux Tweed Top

 photo ready3_zpsc471aafd.jpg

My best DIYs are the ones that end up being my favourite things to wear. The side-slit knit I made a few weeks back has become a go-to piece for me as the weather is steadily getting chillier. Basic faux-knit tops like this are also phenomenal for layering (which is essential for someone like me, whose many years in the Northern hemisphere have only served to confirm how much I resent winter). This edition is similar to the previous one, just slightly slimmer and with regular sleeves instead of dolman.

TOOLS:
 photo 0Tools_zps85b2cfda.jpg
Four- or at least two-way stretch fabric, I used a jersey mix with a knitted texture that doesn't fray, 1.5 m  |  Fabric marker  |  Scissors  |  Pins  |  Thread & Sewing machine 

I.  Fold the fabric in half, right sides facing, and trace the top. A width of approx. 55cm will give you a size M (European 38, US 8). Cut out with a 1 cm seam allowance, leaving you with two identical pieces. Adjust the other piece's neckline to be as deep as you'd like.
 photo 1Trace_zps57c32ed6.jpg
II.  Trace the sleeves. Start by taking the remaining fabric and folding to create the sleeve, and use the top piece you just cut out as a stencil to trace the seam as shown below.
 photo 2Tracesleeve_zpsd4291843.jpg
III.  Measure the desired length of the sleeve and trace to complete. In my top, the curved seam at the base of the sleeve was about 22 cm. Cut out with a 1 cm allowance.
 photo 3Sleevelength_zps75485728.jpg
IV.  Use the sleeve you just cut out to trace the second sleeve (never said I wasn't lazy). You should now have a front and back piece for the top, and two identical sleeves cut out.
 photo 4Tracesecondsleeve_zps66a89fe4.jpg
V.  Finish the necklines. Make a 1 cm-fold, iron if you like to make sewing easier, and do a straight stitch about 0.7 cm from the edge.
 photo 6Sewnnecklines_zps3aaf91ab.jpg
VI.  Place the front and back pieces against each other right sides facing, and pin the shoulder seams together. Sew a straight stitch 1 cm from the edge.
 photo 7Pinshoulders_zps3c4776af.jpg
VII.  Pin the sleeve in its place, right side facing the right side of the top. Repeat for other sleeve and sew a stretch stitch 1 cm from the edge for both sleeves.
 photo 8Pinsleeve_zpscfedfcd2.jpg
VIII.  You may want to try the cape-like top on at this point to confirm size. Mark the spot for the sleeve under seams and the side seams with a couple pins, take off, and pin the sides together all the way. Sew using a stretch stitch. If you want to leave a bit of a slit at the sides, make sure your last pin marks the spot you want the stitch to end.
 photo 9Pinsideseams_zpsa4a97736.jpg
IX.  Optional: you may want to round the corners of the hem slightly. The beauty of jersey is the ability to leave a raw edge that won't unravel.
 photo 10Cuthem_zps6f49c84a.jpg


Trim excess seam allowances and go brave the elements.
 photo ready1_zps2f431fc3.jpg  photo ready2_zpsc91cc910.jpg
xo,

Julia

2 comments:

  1. Where do you buy your fabric?

    ReplyDelete
    Replies
    1. I currently live in Toronto, where I shop mainly at King Textiles which in my opinion is one of the best stores in the city. I also go to Designer fabrics here in TO. On trips to California I go to Britex in San Francisco, and I also sometimes order online.

      Delete

I would love to hear what you think and learn about your DIY adventures!

 

Contour Affair Copyright © 2011 -- Template created by O Pregador -- Powered by Blogger