Sunday, 18 October 2015

Tim Coppens SS2016 -Inspired Longline Top with Side Slits

 photo ready6_zps6lnlwjif.jpg
Anyone that's been here a couple times before knows I hold a special place in my heart for any garment with a slit somewhere. So when this perfect, minimal longline top from the Tim Coppens SS2016 collection landed on my screen it was not a question of if, but how soon. The only thing I changed was the neckline which I made just slightly lower. Overall supremely easy and versatile piece to make! Looking forward to slightly cooler weather so I can pair this with jeans.

TOOLS:
 photo 0 Tools_zpskhwsuov0.jpg
Lightweight fabric, I used silky crêpe, 1,5 m  |  Pins  |  Fabric marker  |  Scissors  |  Needle, thread, Sewing machine

I. Here are the approximate measurements for my cut pieces (result is a size S/M top). The critical measurements are the bust and hip. For the width of the pieces at the bust, measure your bust, divide by 2 and add about 4 cm. Same thing for the hips (though not as critical as with the slits, the top will be open at the hips).
 photo 1 Cut pieces_zpslptgpdtz.jpg
II. Start with the neckline. Cut small notches along the curved edge, and press the first fold with your iron.
 photo 2 Notch neckline_zps2drjs5w7.jpg
Then fold again, pinning as you go. The more pins you add, the better the result. Press with iron, and sew a straight stitch just before the edge of your fold (I did a 0,7 cm fold).
 photo 3 Fold and pin neckline_zpsulnar3bk.jpg
III. Repeat the process with the arm holes. When done you should have something like this:
 photo 4 Sewn neckline and arm hole_zpsjjzsbxyr.jpg
IV. To attach the shoulders, pin them together, right sides facing, leaving the seam allowance of the front piece 0,5 cm longer than that of the back piece. Sew a straight stitch through (or sew with identical seam allowances, and trim the other shorter).
 photo 5 Sew shoulder seams_zpsgd5lmrnv.jpg
On the reverse, with the help of your iron, fold the longer seam allowance so it encases the shorter one. Sew in place either by hand, or with your machine on the right side to make sure your stitch is straight and parallel with the first seam.
 photo 6 Fold and sew_zpso2ylnatr.jpg
V. Pretty much nearly done! Right sides facing, pin the sides together. How far down you take the stitch depends on how high you want the side slits to be. I took my stitch 23 cm down from the armpit. Sew with at least a 1 cm seam allowance and press the seam open.
 photo 7 Pin sides_zpsjdhvzwhf.jpg
VI. The last step is to finish the slits and the hem. I did mine with a double fold and blind stitched all the way by hand, same thing for the hem. Note - you could continue the fold all through the side seam on the reverse side to make it nice and clean, but I didn't really care as this part will never be visible.
 photo 8 Double fold slits_zpsd5tb5j90.jpg
Playing in the desert on the long weekend in my new top!
 photo ready1_zpstu50pzuy.jpg
 photo ready4_zpsrk1flrnq.jpg

 photo ready2_zpsa5b3f4wo.jpg
 photo ready8_zpsxxxa6r9g.jpg xo,

Julia

3 comments:

I would love to hear what you think and learn about your DIY adventures!

 

Contour Affair Copyright © 2011 -- Template created by O Pregador -- Powered by Blogger